Cisco Catalyst 3750 - Page 180

2-150
Catalyst 3750 Switch Command Reference
OL-8552-07
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
dot1x mac-auth-bypass
Examples This example shows how to enable MAC authentication bypass and to configure the switch to use EAP
for authentication:
Switch(config-if)# dot1x mac-auth-bypass eap
This example shows how to enable MAC authentication bypass and to configure the timeout if the
connected host is inactive for 30 seconds:
Switch(config-if)# dot1x mac-auth-bypass timeout inactivity 30
You can verify your settings by entering the show dot1x [interface interface-id] privileged EXEC
command.
Related Commands Command Description
show dot1x [interface
interface-id]
Displays IEEE 802.1x status for the specified port.