Cisco Catalyst 3750 - Page 218

2-188
Catalyst 3750 Switch Command Reference
OL-8552-07
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
errdisable recovery
Examples This example shows how to enable the recovery timer for the BPDU guard error-disabled cause:
Switch(config)# errdisable recovery cause bpduguard
This example shows how to set the timer to 500 seconds:
Switch(config)# errdisable recovery interval 500
You can verify your settings by entering the show errdisable recovery privileged EXEC command.
Related Commands Command Description
show errdisable recovery Displays error-disabled recovery timer information.
show interfaces status
err-disabled
Displays interface status or a list of interfaces in error-disabled
state.
clear errdisable interface Clears the error-disabled state from a port or VLAN that was error
disabled by the per-VLAN error disable feature.