Cisco Catalyst 3750 - Page 389

2-359
Catalyst 3750 Switch Command Reference
OL-8552-07
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
mls qos cos
Examples This example shows how to configure the default port CoS to 4 on a port:
Switch(config)# interface gigabitethernet2/0/1
Switch(config-if)# mls qos trust cos
Switch(config-if)# mls qos cos 4
This example shows how to assign all the packets entering a port to the default port CoS value of 4
on
a port:
Switch(config)# interface gigabitethernet2/0/1
Switch(config-if)# mls qos cos 4
Switch(config-if)# mls qos cos override
You can verify your settings by entering the show mls qos interface privileged EXEC command.
Related Commands Command Description
show mls qos interface Displays quality of service (QoS) information.