Cisco Catalyst 3750 - Page 48

2-18
Catalyst 3750 Switch Command Reference
OL-8552-07
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
archive upload-sw
archive upload-sw
Use the archive upload-sw privileged EXEC command to upload an existing switch image to a server.
archive upload-sw [/source-system-num stack member number | /version version_string]
destination-url
Syntax Description
Defaults Uploads the currently running image from the flash file system.
Command Modes Privileged EXEC
Command History
/source-system-num
stack member number
Specify the specific stack member containing the image that is to be
uploaded.
/version version_string (Optional) Specify the specific version string of the image to be uploaded.
destination-url The destination URL alias for a local or network file system. These options
are supported:
• The syntax for the local flash file system on the standalone switch or
the stack master:
flash:
The syntax for the local flash file system on a stack member:
flash member number:
• The syntax for the FTP:
ftp:[[//username[:password]@location]/directory]/image-name.tar
• The syntax for an HTTP server:
http://[[username:password]@]{hostname |
host-ip}[/directory]/image-name.tar
• The syntax for a secure HTTP server:
https://[[username:password]@]{hostname |
host-ip}[/directory]/image-name.tar
• The syntax for the Secure Copy Protocol (SCP):
scp:[[//username@location]/directory]/image-name.tar
• The syntax for the Remote Copy Protocol (RCP):
rcp:[[//username@location]/directory]/image-name.tar
• The syntax for the TFTP:
tftp:[[//location]/directory]/image-name.tar
The image-name.tar is the name of software image to be stored on the
server.
Release Modification
12.1(11)AX This command was introduced.