Cisco Catalyst 3750 - Page 721

2-691
Catalyst 3750 Switch Command Reference
OL-8552-07
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
show parser macro
# Allow port channels to be automatically formed
channel-protocol pagp
This is an example of output from the show parser macro brief command:
Switch# show parser macro brief
default global : cisco-global
default interface: cisco-desktop
default interface: cisco-phone
default interface: cisco-switch
default interface: cisco-router
customizable : snmp
This is an example of output from the show parser description command:
Switch# show parser macro description
Global Macro(s): cisco-global
Interface Macro Description(s)
--------------------------------------------------------------
Gi1/0/1 standard-switch10
Gi1/0/2 this is test macro
--------------------------------------------------------------
This is an example of output from the show parser description interface command:
Switch# show parser macro description interface gigabitethernet1/0/2
Interface Macro Description
--------------------------------------------------------------
Gi1/0/2 this is test macro
--------------------------------------------------------------
Related Commands Command Description
macro apply Applies a macro on an interface or applies and traces a macro on an interface.
macro description Adds a description about the macros that are applied to an interface.
macro global Applies a macro on a switch or applies and traces a macro on a switch.
macro global
description
Adds a description about the macros that are applied to the switch.
macro name Creates a macro.
show running-config Displays the current operating configuration, including defined macros. For
syntax information, select Cisco IOS Configuration Fundamentals
Command Reference, Release 12.2 > File Management Commands >
Configuration File Management Commands.