Cisco Catalyst 3750 - Page 781

2-751
Catalyst 3750 Switch Command Reference
OL-8552-07
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
snmp-server enable traps
You can verify your setting by entering the show vtp status or the show running-config privileged
EXEC command.
Related Commands Command Description
show running-config Displays the running configuration on the switch. For syntax information,
select Cisco IOS Configuration Fundamentals Command Reference,
Release 12.2 > File Management Commands > Configuration File
Management Commands.
snmp-server host Specifies the host that receives SNMP traps.