Cisco CRS Configuration Guide

interface POS 0/1/0/0
interface POS 0/2/0/0
!
!
ipv4 access-list pfx_acl_1
10 permit ipv4 host 1.0.0.0 any
!
ipv4 access-list pfx_acl_2
10 permit ipv4 host 2.0.0.0 any
!
ipv4 access-list peer_acl_1
10 permit ipv4 host 1.1.1.1 any
20 permit ipv4 host 1.1.1.2 any
!
ipv4 access-list peer_acl_2
10 permit ipv4 host 2.2.2.2 any
!
!
show mpls ldp binding
Related Topics
Configuring Label Advertisement Control (Outbound Filtering), on page 34
Label Advertisement Control (Outbound Filtering), on page 15
Configuring LDP Neighbors: Example
The example shows how to disable label advertisement.
mpls ldp
address-family ipv4
label local advertise
disable
!
!
!
Related Topics
Setting Up LDP Neighbors, on page 36
Configuring LDP Forwarding: Example
The example shows how to configure LDP forwarding.
mpls ldp
address-family ipv4
label local advertise explicit-null
!
show mpls ldp forwarding
show mpls forwarding
Related Topics
Setting Up LDP Forwarding, on page 39
LDP Forwarding, on page 9
Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.1.x
81
Implementing MPLS Label Distribution Protocol
Configuring LDP Neighbors: Example

Cisco CRS Specifications

General

Operating System	Cisco IOS XR
Product Type	Core Router
Form Factor	Modular Chassis
Dimensions	Varies by chassis type
Weight	Varies by chassis type
Architecture	Distributed
Switch Fabric	Multi-stage
Interface Support	Ethernet, SONET/SDH, OTN
Interfaces/Ports	Varies by line card
Port Density	Varies by line card
Routing Protocol	BGP, IS-IS, OSPF, MPLS
Management	CLI, SNMP
Power Supply	Redundant, hot-swappable
Cooling	Redundant, Hot-swappable Fan Trays
Supported Protocols	IPv4, IPv6, MPLS
Management Interfaces	Ethernet, console
Security Features	ACLs