Cisco CRS Configuration Guide

Related Topics
Overview of RSVP for MPLS-TE and MPLS O-UNI , on page 112
Enabling RSVP Traps
With the exception of the RSVP MIB traps, no action is required to activate the MIBs. This MIB feature is
automatically enabled when RSVP is turned on; however, RSVP traps must be enabled.
Perform this task to enable all RSVP MIB traps, NewFlow traps, and LostFlow traps.
SUMMARY STEPS
1.
configure
2.
snmp-server traps rsvp lost-flow
3.
snmp-server traps rsvp new-flow
4.
snmp-server traps rsvp all
5.
Use the commit or end command.
DETAILED STEPS
PurposeCommand or Action
Enters global configuration mode.configure
Example:
RP/0/RP0/CPU0:router# configure
Step 1
Sends RSVP notifications to enable RSVP LostFlow traps.snmp-server traps rsvp lost-flow
Example:
RP/0/RP0/CPU0:router(config)# snmp-server
Step 2
traps rsvp lost-flow
Sends RSVP notifications to enable RSVP NewFlow traps.snmp-server traps rsvp new-flow
Example:
RP/0/RP0/CPU0:router(config)# snmp-server
Step 3
traps rsvp new-flow
Sends RSVP notifications to enable all RSVP MIB traps.snmp-server traps rsvp all
Example:
RP/0/RP0/CPU0:router(config)# snmp-server
Step 4
Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.1.x
132
Implementing RSVP for MPLS-TE and MPLS O-UNI
Enabling RSVP Traps

Cisco CRS Specifications

General

Operating System	Cisco IOS XR
Product Type	Core Router
Form Factor	Modular Chassis
Dimensions	Varies by chassis type
Weight	Varies by chassis type
Architecture	Distributed
Switch Fabric	Multi-stage
Interface Support	Ethernet, SONET/SDH, OTN
Interfaces/Ports	Varies by line card
Port Density	Varies by line card
Routing Protocol	BGP, IS-IS, OSPF, MPLS
Management	CLI, SNMP
Power Supply	Redundant, hot-swappable
Cooling	Redundant, Hot-swappable Fan Trays
Supported Protocols	IPv4, IPv6, MPLS
Management Interfaces	Ethernet, console
Security Features	ACLs