Cisco CRS Configuration Guide

logging events lsp-status state
tunnel-id 2
destination ipv4 unicast 10.0.1.2
path-option 10 no-ero xro-attribute-set exclude-tun1
!
!
!
!
Additional References
For additional information related to implementing GMPLS UNI, refer to the following references:
Related Documents
Document TitleRelated Topic
GMPLS UNI Commands module in Cisco IOS XR
MPLS Command Reference for the Cisco CRS Router
GMPLS UNI commands
MPLS Traffic Engineering commands module in
Cisco IOS XR MPLS Command Reference for the
Cisco CRS Router
MPLS Traffic Engineering commands
RSVP commands module in Cisco IOS XR MPLS
Command Reference for the Cisco CRS Router
RSVP commands
Cisco IOS XR Getting Started Guide for the
Cisco CRS Router
Getting started material
Configuring AAA Services module in Cisco IOS XR
System Security Configuration Guide for the
Cisco CRS Router
Information about user groups and task IDs
Standards
TitleStandard
User Network Interface (UNI) 1.0 Signaling
Specification
OIF UNI 1.0
Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.1.x
392
Implementing GMPLS UNI
Additional References

Cisco CRS Specifications

General

Operating System	Cisco IOS XR
Product Type	Core Router
Form Factor	Modular Chassis
Dimensions	Varies by chassis type
Weight	Varies by chassis type
Architecture	Distributed
Switch Fabric	Multi-stage
Interface Support	Ethernet, SONET/SDH, OTN
Interfaces/Ports	Varies by line card
Port Density	Varies by line card
Routing Protocol	BGP, IS-IS, OSPF, MPLS
Management	CLI, SNMP
Power Supply	Redundant, hot-swappable
Cooling	Redundant, Hot-swappable Fan Trays
Supported Protocols	IPv4, IPv6, MPLS
Management Interfaces	Ethernet, console
Security Features	ACLs