Cisco CRS Configuration Guide

PurposeCommand or Action
• Cancel—Remains in the configuration session, without committing
the configuration changes.
Related Topics
Global, Interface, and Neighbor Authentication Modes, on page 119
RSVP Authentication Global Configuration Mode: Example, on page 150
Configuring the Window Size for RSVP Authentication in Global Configuration Mode
Perform this task to configure the window size for RSVP authentication in global configuration mode.
SUMMARY STEPS
1.
configure
2.
rsvp authentication
3.
window-size N
4.
Use the commit or end command.
DETAILED STEPS
PurposeCommand or Action
Enters global configuration mode.configure
Example:
RP/0/RP0/CPU0:router# configure
Step 1
Enters RSVP authentication configuration mode.rsvp authentication
Example:
RP/0/RP0/CPU0:router(config)# rsvp
Step 2
authentication
RP/0/RP0/CPU0:router(config-rsvp-auth)#
Specifies the maximum number of RSVP authenticated messages that
can be received out-of-sequence.
window-size N
Example:
RP/0/RP0/CPU0:router(config-rsvp-auth)#
Step 3
N
Size of the window to restrict out-of-sequence messages. The
range is from 1 to 64. The default value is 1, in which case all
out-of-sequence messages are dropped.
Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.1.x
136
Implementing RSVP for MPLS-TE and MPLS O-UNI
Configuring Global Configuration Mode RSVP Authentication

Cisco CRS Specifications

General

Brand	Cisco
Model	CRS
Category	Network Router
Language	English