Cisco CRS Configuration Guide

PurposeCommand or Action
•
Entering cancel leaves the router in the current configuration
session without exiting or committing the configuration
changes.
•
Use the commit command to save the configuration changes
to the running configuration file and remain within the
configuration session.
Enabling MLDP Recursive FEC
Perform this task to enable recursive forwarding equivalence class (FEC) support in MPLS MLDP.
SUMMARY STEPS
1.
configure
2.
mpls ldp
3.
mldp
4.
address-family ipv4
5.
recursive-fec
6.
end or commit
DETAILED STEPS
PurposeCommand or Action
Enters Global Configuration mode.configure
Example:
RP/0/RP0/CPU0:router# configure
Step 1
Enters MPLS LDP configuration mode.mpls ldp
Example:
RP/0/RP0/CPU0:router(config)# mpls ldp
Step 2
Enables MLDP.mldp
Example:
RP/0/RP0/CPU0:router(config-ldp)# mldp
Step 3
Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.1.x
73
Implementing MPLS Label Distribution Protocol
Enabling MLDP

Cisco CRS Specifications

General

Brand	Cisco
Model	CRS
Category	Network Router
Language	English