Cisco CRS Configuration Guide

PurposeCommand or Action
Controls how long RSVP maintains security associations with other
trusted RSVP neighbors. The argument specifies the
life-time seconds
Example:
RP/0/RP0/CPU0:router(config-rsvp-nbor-auth)#
Step 3
seconds
Length of time (in seconds) that RSVP maintains idle security
associations with other trusted RSVP neighbors. Range is
from 30 to 86400. The default value is 1800.
life-time 2000
commit—Saves the configuration changes and remains within the
configuration session.
Use the commit or end command.
Step 4
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the configuration
session.
• No—Exits the configuration session without committing the
configuration changes.
• Cancel—Remains in the configuration session, without
committing the configuration changes.
Related Topics
Security Association, on page 120
RSVP Authentication Global Configuration Mode: Example, on page 150
Configuring the Window Size for RSVP Neighbor Authentication
Perform this task to configure the RSVP neighbor authentication window size to check the validity of the
sequence number received.
SUMMARY STEPS
1.
configure
2.
rsvp neighbor IP address authentication
3.
window-size N
4.
Use the commit or end command.
Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.1.x
144
Implementing RSVP for MPLS-TE and MPLS O-UNI
Configuring RSVP Neighbor Authentication

Cisco CRS Specifications

General

Operating System	Cisco IOS XR
Product Type	Core Router
Form Factor	Modular Chassis
Dimensions	Varies by chassis type
Weight	Varies by chassis type
Architecture	Distributed
Switch Fabric	Multi-stage
Interface Support	Ethernet, SONET/SDH, OTN
Interfaces/Ports	Varies by line card
Port Density	Varies by line card
Routing Protocol	BGP, IS-IS, OSPF, MPLS
Management	CLI, SNMP
Power Supply	Redundant, hot-swappable
Cooling	Redundant, Hot-swappable Fan Trays
Supported Protocols	IPv4, IPv6, MPLS
Management Interfaces	Ethernet, console
Security Features	ACLs