Cisco D9854 Installation And Configuration Guide

Chapter 4 Front Panel Operation
126
Menu Item
Description
Parameters
Regenerate
Selects whether to regenerate
the PSI tables in the output.
Always or As Needed
Always - All tables are regenerated.
As Needed - Only regenerate the
tables if the content has changed.
Copy:
This copies all DPM data from
either the ASI output to the
MOIP output (MPEG over IP)
or from the MOIP output to the
ASI output depending on your
selection.
ASI->MOIP or MOIP->ASI
ASI/MOIP1
Menu Item
Description
Parameters
PE
Select the Program Entry to
configure.
1 to 16
InCh
Displays the channel number to
which the PE is tuned. This is
read-only.
1 to 65535
PMT
Indicates the input PID value of
the Program Map Table for the
current channel. This is read-
only.
2 to 8190

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C