Transport Stream Inputs/Outputs
Transport Stream Inputs/Outputs
DVB-ASI Output
The D9854/D9854-I receiver has one DVB-ASI output. This output can be used as an
input for a DVB-T transmitter or other types of DVB-ASI reception equipment.
MPEGoIP Output
The MPEGoIP output provides a number of output modes including the capability
of carrying a decrypted program for digital tier distribution. This helps ensure that
compressed video programs are efficiently distributed to households equipped with
digital set-top boxes. Digital Program Insertion (DPI) information will also be
available along with the video and audio PIDs (Packet Identifiers) for external ad-
insertion in compressed digital format.
The diagram below shows an example of the D9854/D9854-I receiver used in an
MPEGoIP application.
MPE Output
The Multiprotocol Encapsulation (MPE) output provides a means to carry packet
oriented IP protocols on top of a transport stream. The MPE output receives IP
packets from the transport stream and the IP data can be sent through an Ethernet
switch to an IP router or directly to a receiving device.
To Next Page
Loading...
Need help?
General
