Chapter 5 Web GUI Setup and Monitoring
Setting up Audio Parameters
1 From the user interface of the D9854/D9854-I, choose Audio & Video > Audio
Decoding. The Audio Decoding page is displayed.
2 The Audio Selection area allows you to select the audio PID for audio decoding.
The D9854/D9854-I supports two local audio devices.
a In the Select By drop-down list, choose the input source for Audio 1 or
Audio 2.
Note: You cannot select PMT order for one audio and Language List or
Language Entry for the other audio. For example, you cannot select PMT
Order for Audio 1 and Language List for Audio 2.
b If Language List is selected, you choose a language from the Language List
column. If Language Entry is selected, you must enter a language code in the
Manual Entry column. If the languages selected are different, the first PID
with the matching language will play on the appropriate audio device
(Audio 1 or Audio 2). If you select the same language for both Audio 1 and
Audio 2, the PIDs are mapped as follows: the first matching language PID to
Audio 1 and the second matching PID to Audio 2.
To Next Page
Loading...
Need help?
General
