Cisco D9854 Installation And Configuration Guide

Chapter 2 Quick Setup - Read Me First!
16
Setting up for Network Connection
1 Press MENU to display the Main menu.
2 Press to go to the Setup menu. Press SELECT. Press twice to select the IP
menu. Press SELECT twice to go to the IP menu.
3 Use the arrow keys to navigate up and down the IP menu, and the arrow
keys to move across the IP menu to set the IP Address, Mask and Gateway
parameters. Use the number keys to directly enter numbers in the fields. For
more information on keypad operation, see Keypad Convention.
4 Press SELECT each time to save the changes. Press MENU four times to return
to the startup screen.

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C