Cisco D9854 Installation And Configuration Guide

Appendix A
Technical Specifications
384
Control, Management and Data Interfaces
Ethernet Management Interface
Item
Specification
Number of connectors
1
Type of connector
Eight-pin RJ-45
Ethernet type
100/1000BASE-T
Required setup
IP address, default gateway and subnet mask
Ethernet Data Interface
Item
Specification
Number of connectors
1 for D9854
2 for D9854-I
Type of connector
Eight-pin RJ-45
Ethernet type
100/1000 BASE-T
Required setup
IP address, default gateway and subnet mask
RS-232 Data Interface
Item
Specification
Connector type
9-pin sub-D female
Data rates
RS-232 asynchronous data at selectable rates up
to 38.4 kb/s: 300, 1200, 2400, 4800, 9600, 19,200,
38,400 b/s
Alarm Interface
Item
Specification
Number of outputs
1, with one set of contacts closed and one set
open during normal operation.

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C