Cisco D9854 Installation And Configuration Guide

157
Introduction
This chapter describes how to set up the Cisco D9854/D9854-I
Advanced Program Receiver using the web GUI.
Note: The D9854 web GUI is used for all the screen captures in this
chapter. The pages are the same as the D9854-I web GUI, unless
otherwise noted.
5 Chapter 5
Web GUI Setup and Monitoring
In This Chapter
 Logging On to the Web Interface ....................................................158
 D9854/D9854-I Summary Overview ..............................................159
 D9854/D9854-I Menus.....................................................................162
 D9854/D9854-I Web GUI Environment .........................................164
 Setting up Input Information ..........................................................165
 Setting up Audio and Video Information.......................................206
 Configuring Transport Stream Information...................................224
 Configuring System Settings ...........................................................261
 Viewing Support Information .........................................................297

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C