Cisco D9854 Installation And Configuration Guide

Setting up Input Information
199
Viewing the Common Interface (CI) Status
From the user interface of the D9854/D9854-I, choose Input > CI Setup > CI Status.
The CI Status page is displayed.
The following table describes the CI Status:
CI Status
Description
CI Slot
Indicates whether it is the top slot (TOP) or the bottom slot
(BOTTOM).
CAM Status
Status of the CAM (Ready or Not Ready).
Sys Name
System name of the CAM.
Comp Name
Displays the company name of the CAM.
Manufacturer Code
The manufacturer’s code.
Manufacturer ID
The factory loaded application number of the CAM.
Serial Number
The unique serial number of the CAM.
Hardware Version
The hardware version number of the CAM.
Application Version
The software version number of the CAM.

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C