Cisco D9854 - Configuring the IP Input

Setting up Input Information
171
Parameter
Description
ASI Transport
Indicates the current transport synchronization status (Error,
Ok, or N/A).
ASI Packet Size (bytes)
Indicates the packet size (in bytes) for the ASI input (188, 204,
or N/A).
Acquisition State
Displays Full if the ASI and PSI tables have all been found.
Otherwise, it will display Degraded if there are missing tables
or None if no ASI or PSI tables have been found.
TS ID
The Transport ID (in the range from 1 to 65535).
Configuring the IP Input
Note: This feature is for D9854-I only.
1 From the user interface of the D9854-I, choose Input > Input Setup. The Input
Setup page is displayed.
2 Click the IP tab.