Cisco D9854 Installation And Configuration Guide

Chapter 5 Web GUI Setup and Monitoring
204
Viewing the PSI Channels
From the user interface of the D9854/D9854-I, choose Input > PSI Channel. The PSI
Channel page is displayed.
You cannot make any changes in the PSI Channel table and can only view the
available channels and their settings. The following is a list of the various columns:
Abbreviation
Description
Service ID
Indicates the virtual channel number.
TS ID
Displays the identification number of the transport on
which the channel is available. For more information on the
transport streams, see Viewing PSI Frequency Information
(on page 203).
Program Name
Indicates the name of the channel.
PMT PID
Indicates the PID of the channel's Program Map Table.
ECM PID
Indicates the PID of the channel's Entitlement Control
Message stream.

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C