Chapter 4 Front Panel Operation
Indicates the MAC address of the Control Port Ethernet interface.
Indicates the FPGA type and number information.
Licenses
Displays a list of software licenses for
the D9854/D9854-I Advanced Program
Receiver. Press up and down to scroll
through the list of features.
HD Decode, H.264 Decode,
DVB-S2, or MPEGoIP Out
Indicates whether the selected software
feature is licensed and enabled.
Note: All software licenses are enabled
for this release (temporarily). Any of
these required licenses will need to be
purchased from Cisco in subsequent
software releases.
Features
Displays a list of hardware options for
the D9854/D9854-I Advanced Program
Receiver. Press up and down to scroll
through the list of options.
MPOIP In (D9854-I only),
MPOIP Out, MPOIP SPTS,
MPOIP FEC (D9854-I only),
SDI, Firewall Ver
Indicates whether the selected
hardware option is installed.