Cisco D9854 Installation And Configuration Guide

Chapter 1 Introduction
6
The diagram below shows an example of the D9854/D9854-I receiver used in an
MPE application.
HD-SDI Outputs
The D9854/D9854-I Advanced Program Receiver is designed for satellite content
distribution applications requiring DVB-S and DVB-S2 reception capabilities with
advanced digital outputs for digital tier program distribution. A built-in decoder is
capable of decoding an MPEG-2 or MPEG-4 High Definition (HD) program for
analog monitoring. A high-quality HD-SDI output version is available for re-
encoding applications.
The diagram below shows an example of the D9854/D9854-I receiver used in HD-
SDI monitoring applications.
MPEGoIP Input
Note: The MPEGoIP Input is supported in the D9854-I only.
The MPEGoIP input allows a decoder to process User Datagram Protocol (UDP) or
Real-time Transport Protocol (RTP)-encapsulated MPEG transport streams
(protected streams) from the IP/Ethernet network. The incoming stream is either
MPTS or Single Program Transport Stream (SPTS).

Cisco D9854 Specifications

General

Brand	Cisco
Model	D9854
Category	Receiver
Language	English