Configuring System Settings
Viewing Version Information
From the user interface of the D9854/D9854-I, choose System Settings > Versions.
The Versions page is displayed. The following is an example of the D9854-I Versions
page. The D9854 Versions page is the same, but without the FEC FPGA information.
The FEC feature is for the D9854-I only.
The Current Versions area displays the currently running loaded application
version, the current limit for the Field Programmable Gate Array (FPGA) version
number, and the FEC FPGA version number (D9854-I only).
In the Version Controls area, from SW APP drop-down list, choose a different
application version number to load. From the FPGA drop-down list, choose a
different FPGA version number to load. For D9854-I only, you can choose the FEC
FPGA version number from the FEC FPGA drop-down list. The Selected Version
dialog box is displayed. Click Select & Reboot to load the selected application and
reboot the unit. Click Erase to remove the selected application version. You will be
prompted to continue or not. Click OK to continue the deletion.
Note: You cannot reboot or remove applications during a download or erase.
To Next Page
Loading...
Need help?
General
