Setting up Input Information
Viewing the Input Status
1 From the user interface of the D9854/D9854-I, choose Input > Input Status. The
Input Status page is displayed.
The Current Input Status area displays the same information shown in the Input
Setup page. For more information on the parameters displayed, see Setting up
the RF Input (on page 165).
The Tuner Performance area displays the satellite dish information, such as the
C/N Margin and Signal Level.
Configuring the Disaster Recovery Settings
The disaster recovery settings allow you to configure the search path when a disaster
occurs. By default, the disaster recovery feature is enabled. For more information on
disaster recovery, see Disaster Recovery (on page 8).
Note: If the unit is in a disaster recovery or NIT retune mode, an error message is
displayed, informing you that any changes made to the page will interrupt the
disaster recovery or NIT retune process. The error message appears when you load,
refresh, or apply changes to the page. For more information on NIT retune, see NIT
Retune Recovery (on page 11).
To Next Page
Loading...
Need help?
General
