Cisco D9854 Installation And Configuration Guide

347
Warnings
Warning
Message
Type
Message
Cause/Remedy
Description
ID
ASI TS
Overflow
Set
ASI Output
Overflow
Cause: Uplink settings
may have changed since
setting up the unit.
Remedy: Increase the
output rate, drop
unreferenced content in
DPM Options, and drop
the programs that are
not needed for
downstream devices.
Contact your (uplink)
service provider to
verify the expected bit
rate settings.
The output rate is
higher than level set
by the user.
40000
ASI TS
Overflow
Clear
ASI Output
Overflow
Cleared
–
–
40000
MPoIP TS
Overflow
Set
MPEGoIP Output
Overflow
Cause: Uplink settings
may have changed since
setup of the unit.
Variable Bit
Rate/Statmuxed streams
may be in use.
Remedy: Increase output
rate, drop unreferenced
content in DPM Options,
and drop programs not
needed for downstream
devices. Contact the
(uplink) service provider
to verify the expected bit
rate settings.
The output rate is
higher than level set
by the user.
41000
MPoIP TS
Overflow
Clear
MPEGoIP Output
Overflow
Cleared
–
–
41000

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C