Cisco D9854 Installation And Configuration Guide

Setting up Input Information
195
Configuring the Common Interface (CI) Information
1 From the user interface of the D9854/D9854-I, choose Input > CI Setup. The CI
Setup page is displayed.
2 Choose Enable from the CI CAM QUERY Support drop-down list to query the
CAM prior to decryption to ensure that the card can be decrypted. The default is
Disable.
3 Choose Enable from the CI CAM Auto Reset drop-down list to automatically
reset the card. The default is Disable.
4 From the CA List Management Type drop-down list, choose whether the
Common Interface List Management should add and delete (AddDel) individual
programs or update all (UpdateAll) the programs when the list changes.
Note: Updating all the programs will cause temporary loss of service for all the
programs when another is being modified.

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C