Cisco D9854 Installation And Configuration Guide

Chapter 5 Web GUI Setup and Monitoring
236
11 Click Apply.
12 Click Copy To MOIP to copy all the DPM data from the ASI output to the MPEG
over IP output.
Viewing the ASI Output Transport Status
From the user interface of the D9854/D9854-I, choose Transport Stream > Output
Transport Status under ASI Output. The PID Output Status page is displayed.
The Program Entry - Referenced PIDs table displays the specified PE ES PIDs
information on the output.
The Output Channel and PID Conflicts table displays a list of conflicts when the
DPM alarm is active.

Cisco D9854 Specifications

General

Brand	Cisco
Model	D9854
Category	Receiver
Language	English