EasyManuals Logo

Cisco D9854 Installation And Configuration Guide

Cisco D9854
440 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #318 background imageLoading...
Page #318 background image
Chapter 5 Web GUI Setup and Monitoring
294
Configuring Lock Level Settings
1 From the user interface of the D9854/D9854-I, choose System Settings > Lock
Level Settings. The Lock Level Settings page is displayed.
2 Click Change Lock Level and the Change Lock Level dialog box is displayed.
3 From the Lock Level drop-down list, choose the lock level which restricts access
and prevents unauthorized changes to the receiver settings (0, 1, 2, or 3). The
default setting is 0.
Note: For details on the lock levels, see Factory Default Settings and Lock Levels
(on page 390).
4 In the Enter the Password to change the lock level field, enter the password to
change the lock level. Depending on the unit, the default password is 1234. For
more information on the default password, contact Cisco customer support.
5 Click Yes.

Table of Contents

Other manuals for Cisco D9854

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco D9854 and is the answer not in the manual?

Cisco D9854 Specifications

General IconGeneral
ModelD9854
CategoryReceiver
OutputASI, IP
DecodingMPEG-2
Conditional AccessBISS
Receiver TypeProfessional IRD
解密DVB-CSA, BISS, AES
Input Frequency Range950 MHz to 2150 MHz
Modulation FormatsQPSK, 8PSK
Symbol Rate1 to 45 Msps
Power Supply100-240 VAC, 50/60 Hz
Power Consumption40W (typical)
Operating Temperature0°C

Related product manuals