Configuring System Settings
If the incorrect lock level or password is entered, an error message appears at the
top of the page.
Changing the Lock Level Password
A unique lock level password (4-digit password) protects the current receiver
settings against unauthorized changes. When changing the password, record and
keep this number in a secure location. Depending on the unit, the default password
is 1234. For more information on the default password, contact Cisco customer
support.
Important: Proceed with caution when changing the password as this operation
cannot be undone. If the password is lost or is unavailable, contact Cisco customer
support.
1 In the Lock Level Settings page, click Change Lock Level Password. The Change
Lock Level Password dialog box is displayed.
2 In the Enter Current lock level Password field, enter the current password.
3 In the Enter New Password field, enter the new password, any number from 0 to
9.
4 In the Re-enter New Password field, enter the new password again and click
Yes. A message appears informing you that the password was changed
successfully.
Note: If the password is lost or is unavailable, contact Cisco Services.
To Next Page
Loading...
Need help?
General
