Cisco D9854 Installation And Configuration Guide

Chapter 6 Service and Maintenance
346
Alarm
Message
Type
Message
Cause/Remedy
Description
Severity
ID
NIT Retune
Recovery
Set
NIT Retune
Recovery
Cause: NIT is
configured
incorrectly on the
uplink. It fails to
lock/acquire the
signal.
Remedy: Contact
your PNC uplink
administrator to
correct the invalid
NIT on the uplink
so that the signal
can be locked and
acquired. The
administrator
should also ensure
that the uplink
configuration
matches the NIT.
An invalid NIT
is received and
the unit fails to
lock/acquire
the NIT signal.
Major
980
NIT Retune
Recovery
Clear
Alarm cleared
–
The error is
cleared when
another valid
NIT is received
and the signal
is locked and
acquired, or the
incorrect
configuration is
resolved.
Major
980

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C