Cisco D9854 Installation And Configuration Guide

Setting up Input Information
169
Parameter
Description
Signal Status
Indicates whether the input signal is locked.
 Locked - Indicates the receiver is locked to a carrier
with no valid content.
 Lock+Sig - Indicates the receiver is locked to a carrier
with valid content.
 No Lock - Indicates the receiver is not locked to a
carrier.
AFC (MHz)
Indicates the current Automatic Frequency Control count, in
MHz.
Acquisition State
Displays Full if the SI and PSI tables have all been found.
Otherwise, it will display Degraded if there are missing tables or
None if no SI or PSI tables have been found.
Orbital Validation Status
Displays the status of the last user orbital validation performed.
It displays Passed if the last orbital validation was successful or
None if an orbital validation was never performed. Otherwise, it
will display a reason for the failed validation.
Orbital Validation Date
Displays the last date and time that the user orbital validation
was performed, if applicable.

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C