Cisco D9854 Installation And Configuration Guide

Setting up Input Information
191
The Signal Lock Timer, Signal Loss Timer, and Verification Timer fields display
the signal lock, signal loss, and verification periods set on the Disaster Recovery
Setup page if the Configured By field is set to User. If the Configured By field is set
to Uplink, the disaster recovery profile settings from the PNC uplink are displayed.
But if the unit is not connected to the uplink, the default values of the unit are
displayed. For more information, contact your PNC uplink administrator.
The Backup Transport area displays the tuning parameters of the current origin and
backup transports configured. For example, if only Backup 1 and Backup 3 are
configured, the table will display the tuning parameters for Origin, Backup 1, and
Backup 3. The Configured By row indicates that the backup transport is configured
by a user.
The Search Path area displays the channel numbers assigned to the Origin and
Backup transports for PE1 to PE16.

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C