Cisco D9854 Installation And Configuration Guide

Setting up Audio and Video Information
215
Audio Status
Description
PID
Indicates the program PID number (1 to 8191).
Language
Indicates the language code.
Format
Indicates the format of the audio input stream.
Bit Rate (kbps)
Displays the bit rate of the audio input stream, in kbps.
SFR
Displays the sample rate of the input audio stream, in kHz (32, 44.1,
or 48 KHz).
Buffer
Indicates the buffer level of the input audio stream, in bytes.
DDP Mode
Displays the presence of Dolby Digital Plus frames within a Dolby
Digital audio stream (ON or OFF).
Dualmono Mode
Indicates the presence of dual mono audio outputs in the audio
stream (ON or OFF).
Click List Audio PIDs to view a list of all the current audio PIDs.
The following table describes the Audio PIDs information:
Audio Status
Description
Type
Displays the input audio source (AUD1 or AUD2)

Cisco D9854 Specifications

General

Brand	Cisco
Model	D9854
Category	Receiver
Language	English