EasyManuals Logo

Cisco D9854 Installation And Configuration Guide

Cisco D9854
440 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #327 background imageLoading...
Page #327 background image
Viewing Support Information
303
During the upgrade, click Return to Browser (not recommended) to return to the
web browser. The application download continues. We do not recommend that you
interrupt the upgrade during the application download. Click Download Status
Toggle to toggle the download data update between the web GUI and an external
device.
Note: For application downloads, once the download is complete, the unit will
reboot automatically. For FPGA downloads, you must click Reboot Receiver to
manually reboot the unit and complete the download. This is to facilitate the typical
case in which the user intends to flash the FPGA file (no auto reboot) followed by an
APP download (auto reboot).
Note: If you are downloading an older version of the software application, we
recommend that you clear the browser cache prior to logging back in to the
D9854/D9854-I web GUI.

Table of Contents

Other manuals for Cisco D9854

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco D9854 and is the answer not in the manual?

Cisco D9854 Specifications

General IconGeneral
ModelD9854
CategoryReceiver
OutputASI, IP
DecodingMPEG-2
Conditional AccessBISS
Receiver TypeProfessional IRD
解密DVB-CSA, BISS, AES
Input Frequency Range950 MHz to 2150 MHz
Modulation FormatsQPSK, 8PSK
Symbol Rate1 to 45 Msps
Power Supply100-240 VAC, 50/60 Hz
Power Consumption40W (typical)
Operating Temperature0°C

Related product manuals