Cisco D9854 - Page 344

Chapter 6 Service and Maintenance
320
Alarm
Message
Type
Message
Cause/Remedy
Description
Severity
ID
Shutdown
Event
Set
User requested
service restore
Cause: User
request requires
reboot or internal
system error.
Remedy: If it is an
internal system
error fault, clear
alarms, reset the
unit, notify Cisco
Services if the
problem persists.
Restore
operation
required restart
Major
20000
Shutdown
Event
Set
PRODUCTION -
Protect Flash
Cause: User
request requires
reboot or internal
system error.
Remedy: If it is an
internal system
error fault, clear
alarms, reset the
unit, notify Cisco
Services if the
problem persists.
Reboot after
production
tables
removed.
Major
20000
Shutdown
Event
Set
I2C Failure
Cause: Possible
software/hardwar
e issue.
Remedy: Clear
alarms, reset
unit, notify Cisco
Services if the
problem persists.
Internal system
error.
Major
20000
Shutdown
Event
Set
WDOG: FPGA not
loaded
Cause: Possible
software/hardwar
e issue.
Remedy: Clear
alarms, reset unit,
notify Cisco
Services if the
problem persists.
FPGA has not
been loaded.
Major
20000