Cisco D9854 Installation And Configuration Guide

411
A
About Menu • 147
About the Front Panel • 44
Accessing T CP and UDP Services • 93
Adding a New User • 39
Adding a T rap Destination • 274
Administration • 390
Administrator User Privileges • 38
Alarm Interface • 384
Alarm/Warning • 401
Alarms • 306
Alarms/Warnings • 152, 160
Analog Audio Outputs • 380
Analog SD Video Output • 376
Analog SD Video Output, CVBS1 and CVBS2
for monitoring • 378
Applicable Standards and Notices • 408
ASI Input • 76, 383, 391
ASI Out • 20
ASI Output • 381
ASI/MOIP1 • 126
Aspect Ratio • 379
Aspect Ratio Conversions • 97
Assigning a Program Channel to a PE (Program
Entry) • 19
Assigning Program to the Program Entry • 51
Audio • 57, 100, 396
Audio Outputs • 380
Audio Slot • 105
B
Backup Channel • 145
Backup Channel Status • 69
Backup T ransport • 145
Backup T ransport Status • 69
C
Captions • 103
Changing a Password (allowed by all Users) • 40
Changing a Username • 39
Changing the Lock Level Password • 295
Changing the Relay Mode for Alarm Monitoring
• 35
Channel Authorization Status • 49
CI • 109, 397
CI Slots • 44
Common Interface Modules • 41
Conditional Access • 380
Configuring DPM General Settings • 233
Configuring Forward Error Correction Settings •
248
Configuring IP De-Jittering • 174
Configuring MPEG over IP Flow • 172
Configuring MPEG over IP Streams • 244
Configuring Open-collector Outputs • 37
Configuring System Settings • 261
Configuring the ASI Output • 224
Configuring the Disaster Recovery Settings •
183
Configuring the DPM General Settings • 255
Configuring the DPM MPEGoIP Output Details
• 251
Configuring the IP Input • 171
Configuring the MPE Settings • 271
Configuring the MPEGoIP Output • 237
Configuring T ransport Stream Information • 224
Connecting AC Power to the D9854/D9854-I
Receiver • 29
Connecting the ASI Input • 32
Connecting the ASI Output • 34
Connecting the Audio Outputs • 33
Connecting the Balanced Audio Output • 33
Connecting the Component Video Output • 32
Connecting the Composite Video Output • 32
Connecting the Cue T one Interface • 37
Connecting the Cue T rigger Interface • 37
Connecting the Digital Audio Outputs • 33
Connecting the Ethernet Management Interface •
34
Connecting the HD-SDI Outputs • 32
Connecting the Input/Output Signals • 32
Connecting the IP T S Input/Output • 34
Index

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C