Cisco SCE2020-4XGBE-SM - Page 134

5-40
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 5 Configuring the Management Interface and Security
Configuring and Managing the SNMP Interface
pcube Enterprise MIB
The SCE proprietary pcube MIB enables external management systems to retrieve general information
regarding the SCE platform operating status and resources utilization, extract real time measurements of
bandwidth utilization and network statistics, and receive notifications of critical events and alarms.
Note The following object identifier represents the pcube Enterprise MIB:
Note 1.3.6.1.4.1.5655, or iso.org.dod.internet.private.enterprise.pcube
The pcube Enterprise MIB splits into four main groups:
• Products
• Modules
• Management
• Workgroup
The pcube enterprise tree structure is defined in a MIB file named pcube.mib.
Refer to the Proprietary MIB Reference, page B-1 for a complete description of the pcube enterprise
MIB.
Figure 5-1 illustrates the pcube Enterprise MIB structure. Conventions used in the diagram:
• Dotted arrows surrounding a unit or units indicate that the component is described in the MIB file
specified below the line.
• A shadowed box indicates that the component is described in its own MIB file.
Figure 5-1 pcube Enterprise MIB Structure
Pcube
5655
pcubeProducts
1
se2000
3
se1000
2
se100
1
pcubeModules
2
pcubeMgmt
3
pcubeConfigCopyMIB
1
pcubeEngageMIB
4
pcubeSeMIB
3
pcubeEngageConformance
1
pcubeSeConformance
1
pcubeEngageGroups
1
pcubeSeGroups
1
pcubeProductsMIB
2
pcubeWorkgroups
4
pcubeEngageObjs
2
pcubeSEObjs
pcubeSeMIB (Pcube SCEMIB) pcubeEngageMIB
(CISCO-SCAS
-BB MIB)
1
pcubeSeEvents
0
162751