xxxi
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
About this Guide
Revised: June 15, 2009, OL-7827-12
Introduction
This preface describes who should read the Cisco SCE2000 and SCE1000 Software Configuration
Guide, how it is organized, and its document conventions.
This guide is for experienced network administrators who are responsible for configuring and
maintaining the SCE platform.
Note This guide applies to the Cisco SCE 2000 and the Cisco SCE1000 platforms. For information concerning
configuring the Cisco SCE8000 platform, refer to the Cisco SCE8000 10GBE Software Configuration
Guide or the Cisco SCE8000 GBE Software Configuration Guide.
Document Revision History
The Document Revision History below records changes to this document.
Table 1 Document Revision History
Revision
Cisco Service Control
Release and Date Change Summary
OL-7827-12 3.5.5
June, 2009
Added information regarding the following:
• New format of the connection-mode command and
new related show commands (see Configuring the
Connection, page 7-1)
• New show commands related to to the cascade
functionality (see CLI Commands for Cascaded
Systems, page 10-10)
OL-7827-11 3.5.0
February, 2009
Changed the title to Cisco SCE 2000 and SCE 1000
Software Configuration Guide to clarify that this guide
does not apply to the SCE8000 platform.
To Next Page
Loading...
