Cisco SCE2020-4XGBE-SM - Adding an SCMP Peer Device; How to Define an SCMP Peer Device

14-12
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 14 Managing the SCMP
Configuring the SCMP
Adding an SCMP Peer Device
• How to Define an SCMP Peer Device, page 14-12
• Assigning the SCMP Peer Device to an Anonymous Group, page 14-13
Adding an SCMP peer device is a two-step process:
1. Define the device, configuring the following parameters:
– device name
– RADIUS host
– RADIUS shared secret authorization
– port number (optional)
– accounting port number (optional)
2. Associate the device with one or more unmapped anonymous groups.
How to Define an SCMP Peer Device
Options
The following options are available:
• peer_device_name — User-assigned name of the SCMP peer device
• radius_hostname — IP address or host-name of the RADIUS host (if a host-name is used, it must
be valid at time of the configuration)
• shared_secret — RADIUS shared secret
• auth-portnumber (optional) — authorization port number
• acct-portnumber (optional) — accounting port number
Defaults:
• auth-port# — 1812
• acct-port# — 1813
Step 1 From the SCE(config)# prompt, type scmp name peer_device_name radius radius_hostname secret
shared_secret
[auth-port auth-portnumber acct-port acct-portnumber] and press Enter.