Cisco SCE2020-4XGBE-SM - Importing and Exporting Subscriber Information; How to Import Subscriber Information; Options

9-9
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 9 Managing Subscribers
Importing and Exporting Subscriber Information
Importing and Exporting Subscriber Information
Use the following commands to import subscriber data from csv files and to export subscriber data to
these files:
• subscriber import csv-file
• subscriber export csv-file
• subscriber anonymous-group import csv-file
• subscriber anonymous-group export csv-file
• subscriber template import csv-file
• subscriber template export csv-file
These subscriber management commands are LineCard interface commands. Make sure that you are in
LineCard Interface command mode.
Note MPLS/VPN-based subscribers cannot be defined, imported, or exported by a subscriber file.
Options
The following option is available:
• filename — the name of the csv file.
How to Import Subscriber Information
Step 1 From the SCE(config if)# prompt, type subscriber import csv-file filename and press Enter.
Imports the subscriber information from the specified file.
Imported subscriber information is added to the existing subscriber information. It does not overwrite
the existing data.
If the information in the imported file is not valid, the command will fail during the verification process
before it is actually applied.