Cisco SCE2020-4XGBE-SM - Rdrformattercategorydeststatus (1.3.6.1.4.1.5655.4.1.6.12.1.2); Loggeruserlogenable (1.3.6.1.4.1.5655.4.1.7.1); Loggeruserlognuminfo (1.3.6.1.4.1.5655.4.1.7.2); Loggeruserlognumwarning (1.3.6.1.4.1.5655.4.1.7.3)

B-52
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Appendix B Proprietary MIB Reference
pcubeWorkgroup (1.3.6.1.4.1.5655.4)
rdrFormatterCategoryDestStatus (1.3.6.1.4.1.5655.4.1.6.12.1.2)
Indicates whether the destination is currently active or standby.
In redundancy and in simple Load Balancing rdrFormatterForwardingMode there can be only one
active destination, which is where the reports are currently being sent. In multicast mode, all destinations
will be assigned the active(2) status
Syntax
INTEGER {1 (other) — none of the following2 (active) — this is the destination to which
reports are currently being sent3 (standby) — this destination is a backup
}
loggerUserLogEnable (1.3.6.1.4.1.5655.4.1.7.1)
Indicates whether the logging of user information is enabled or disabled.
Syntax
INTEGER {1 (enabled) 2 (disabled) }
loggerUserLogNumInfo (1.3.6.1.4.1.5655.4.1.7.2)
The number of Info messages logged into the user log file since last reboot or last time the counter was
cleared
Syntax
Unsigned32 (0...4294967295)
loggerUserLogNumWarning (1.3.6.1.4.1.5655.4.1.7.3)
The number of Warning messages logged into the user log file since last reboot or last time the counter
was cleared.
Syntax
Unsigned32 (0...4294967295)
Access RO
Access RO
Access RO
Access RO