Cisco SCE2020-4XGBE-SM - Txqueuesentry (1.3.6.1.4.1.5655.4.1.11.1.1); Txqueuesmoduleindex (1.3.6.1.4.1.5655.4.1.11.1.1.1); Txqueuesportindex (1.3.6.1.4.1.5655.4.1.11.1.1.2); Txqueuesqueueindex (1.3.6.1.4.1.5655.4.1.11.1.1.3)

B-77
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Appendix B Proprietary MIB Reference
pcubeWorkgroup (1.3.6.1.4.1.5655.4)
txQueuesEntry (1.3.6.1.4.1.5655.4.1.11.1.1)
Entry containing information for a specified SCE transmit queue.
Index
{txQueuesModuleIndex, txQueuesPortIndex, txQueuesQueueIndex}
Syntax
SEQUENCE {txQueuesModuleIndex txQueuesPortIndex txQueuesQueueIndex txQueuesDescription
txQueuesBandwidth txQueuesUtilization txQueuesUtilizationPeak txQueuesUtilizationPeakTime
txQueuesClearCountersTime }
txQueuesModuleIndex (1.3.6.1.4.1.5655.4.1.11.1.1.1)
An index value ( pmoduleIndex ) that uniquely identifies the module where the queue is located.
Syntax
INTEGER (1..255)
txQueuesPortIndex (1.3.6.1.4.1.5655.4.1.11.1.1.2)
An index value that uniquely identifies the port on which the queue is located.
Syntax
INTEGER (1..255)
txQueuesQueueIndex (1.3.6.1.4.1.5655.4.1.11.1.1.3)
An index value that uniquely identifies the queue within the specified port. The value is determined by
the location of the queue on the port.
Valid entries are 1 to the value of pportNumTxQueues for the specified port.
Syntax
INTEGER (1..255)
Access not-accessible
Access RO
Access RO
Access RO