Cisco SCE2020-4XGBE-SM - Pmoduletype (1.3.6.1.4.1.5655.4.1.3.1.1.2); Pmodulenumtrafficprocessors (1.3.6.1.4.1.5655.4.1.3.1.1.3); Pmoduleslotnum (1.3.6.1.4.1.5655.4.1.3.1.1.4); Pmodulehwversion (1.3.6.1.4.1.5655.4.1.3.1.1.5)

B-36
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Appendix B Proprietary MIB Reference
pcubeWorkgroup (1.3.6.1.4.1.5655.4)
pmoduleType (1.3.6.1.4.1.5655.4.1.3.1.1.2)
The type of module.
Syntax
INTEGER {1 (other) — none of the following2 (gbe2Module) — 2 port Gigabit Ethernet line
interface, 2 Fast Ethernet 10/100 management interfaces 3 (fe2Module) — 2 port Fast
Ethernet line interface, 1 Fast Ethernet 10/100 management interface4 (gbe4Module) — 4
port Gigabit Ethernet line interface, 2 Fast Ethernet 10/100 management interfaces5
(fe4Module) — 4 port Fast Ethernet line interface, 2 Fast Ethernet 10/100 management
interfaces6 (oc12-4Module) — 4 port OC12 line interface, 2 Fast Ethernet 10/100
management interfaces7 (fe8Module) — 8 port Fast Ethernet line interface, 2 Fast Ethernet
10/100 management interfaces
}
pmoduleNumTrafficProcessors (1.3.6.1.4.1.5655.4.1.3.1.1.3)
The number of traffic processors supported by the module.
Syntax
INTEGER (0..255)
pmoduleSlotNum (1.3.6.1.4.1.5655.4.1.3.1.1.4)
The number of the slot in the chassis in which the module is installed.
Valid entries are from 1 to the value of pchassisNumSlot s.
Syntax
INTEGER (1..255)
pmoduleHwVersion (1.3.6.1.4.1.5655.4.1.3.1.1.5)
The hardware version of the module.
Syntax
DisplayString
Access RO
Access RO
Access RO
Access RO