Cisco SCE2020-4XGBE-SM - Pportoperduplex (1.3.6.1.4.1.5655.4.1.10.1.1.8); Pportlinkindex (1.3.6.1.4.1.5655.4.1.10.1.1.9); Pportoperstatus (1.3.6.1.4.1.5655.4.1.10.1.1.10); Txqueuestable (1.3.6.1.4.1.5655.4.1.11.1)

B-76
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Appendix B Proprietary MIB Reference
pcubeWorkgroup (1.3.6.1.4.1.5655.4)
pportOperDuplex (1.3.6.1.4.1.5655.4.1.10.1.1.8)
Indicates whether the port is operating in half-duplex or full-duplex.
Syntax
INTEGER {1 (half) 2 (full) }
pportLinkIndex (1.3.6.1.4.1.5655.4.1.10.1.1.9)
The linkIndex of the link to which this port belongs.
Value of 0 indicates that this port is not associated with any link.
Value of -1 indicates that this port is associated with multiple links.
Syntax
INTEGER (-1..255)
pportOperStatus (1.3.6.1.4.1.5655.4.1.10.1.1.10)
The status of the port. If the port is down, the reason is indicated.
Syntax
INTEGER {1 (other) — none of the following2 (up) — the port is up3
(reflectionForcingDown) — the port is currently forced down due to the link reflection
mechanism4 (redundancyForcingDown) — the port is currently forced down due to redundancy
reasons5 (otherDown) — the port is down due to other reasons
}
txQueuesTable (1.3.6.1.4.1.5655.4.1.11.1)
A list of information for each SCE platform transmit queue.
Syntax
Sequence of txQueuesEntry
Access RO
Access RO
Access RO
Access not-accessible