CHAPTER
2-1
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
2
Command Line Interface
Revised: June 15, 2009, OL-7827-12
Introduction
This chapter describes how to use the SCE platform Command-Line Interface (CLI), its hierarchical
structure, authorization levels and its help features. The Command-Line Interface is one of the SCE
platform management interfaces.
The CLI is accessed through a Telnet session or directly via the console port on the front panel of the
SCE platform. When you enter a Telnet session, you enter as the simplest level of user, in the User Exec
mode.
The SCE platform supports up to eleven concurrent CLI sessions; five sessions initiated by Telnet
connection, five sessions by SSH connection, and one session on the console port.
• Authorization and Command Levels (Hierarchy), page 2-2
• CLI Help Features, page 2-9
• Navigational and Shortcut Features, page 2-11
• Managing Command Output, page 2-14
• Creating a CLI Script, page 2-16
To Next Page
Loading...
