B-6
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Appendix B Proprietary MIB Reference
pcubeModules (1.3.6.1.4.1.5655.2)
tpServiceLoss
The average service loss per second in the last minute (or since the last time the TP counters were
cleared) in a traffic Processor, in units of 0.001%.
In previous versions, it indicated the service loss since last reboot or since the last time the counters
were cleared.
Using this Reference
This reference describes all existing MIB objects. For each object, the following information is
presented:
pcubeModules (1.3.6.1.4.1.5655.2)
pcubeModules provides a root object identifier from which module identity values may be assigned.
Modules:
• PCUBE-SE-MIB: pcubeSeMIB (1.3.6.1.4.1.5655.2.3)
• CISCO-SCAS-BB-MIB: pcubeEngageMIB (1.3.6.1.4.1.5655.2.4) (See the "SCA BB Proprietary
MIB Reference" chapter in the Cisco SCA BB Reference Guide for a description of the
CISCO-SCAS-BB-MIB.)
pcubeSeMIB (1.3.6.1.4.1.5655.2.3)
Main SNMP MIB for the Cisco SCE products such as SCE 2000 and SCE 1000. This MIB provides
configuration and runtime status for chassis, control modules, and line modules on the SCOS systems.
• pcubeSeMIB Object Groups (1.3.6.1.4.1.5655.2.3.1.1), page B-7
• pcubeCompliances (1.3.6.1.4.1.5655.2.3.1.2), page B-15
IDENTIFIERS MIB descriptor name and OID
DESCRIPTION Description of the object, including format and
legal values, if applicable.
ACCESS Access control associated with the object:
• Read only (RO)
• Read/Write (RW)
SYNTAX The general format of the object.
To Next Page
Loading...
