9-25
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 9 Managing Subscribers
Monitoring Subscribers
How to display mappings for a specified subscriber
Options
The following options are available:
• name — subscriber name
Step 1 From the SCE> prompt, type show interface linecard 0 subscriber name name mappings and press
Enter.
How to display OS counters for a specified subscriber
Options
The following options are available:
• name — subscriber name
Step 1 From the SCE> prompt, type show interface linecard 0 subscriber name name counters and press
Enter.
Displaying Anonymous Subscriber Information
• How to display currently configured anonymous groups, page 9-26
• How to display currently configured templates for anonymous groups, page 9-26
• How to display current configuration for a specified anonymous group, page 9-26
• How to display subscribers in a specified anonymous group, page 9-26
• How to display all subscribers currently in anonymous groups, page 9-26
• How to display the number of subscribers in a specified anonymous group, page 9-27
• How to display the total number of subscribers in all anonymous groups, page 9-27
You can display the following information regarding the anonymous subscriber groups:
• aging (see How to Display Aging for Anonymous Group Subscribers, page 9-40)
• currently configured anonymous groups
• currently configured subscriber templates
• configuration of a specified anonymous group
• number of subscribers in a specified anonymous group, or in all anonymous groups
Use the following commands to display anonymous subscriber information:
• show interface linecard 0 subscriber templates [index]
• show interface linecard 0 subscriber anonymous-group [all] [name ‘groupname’]
• show interface linecard 0 subscriber amount anonymous [name ‘groupname’]
• show interface linecard 0 subscriber anonymous [name ‘groupname’]
To Next Page
Loading...
