Cisco SCE2020-4XGBE-SM - Subscriberpropertiesvaluestable (1.3.6.1.4.1.5655.4.1.8.3); Subscriberpropertiesvalueentry (1.3.6.1.4.1.5655.4.1.8.3.1); Spvindex (1.3.6.1.4.1.5655.4.1.8.3.1.1)

B-60
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Appendix B Proprietary MIB Reference
pcubeWorkgroup (1.3.6.1.4.1.5655.4)
subscriberPropertiesValuesTable (1.3.6.1.4.1.5655.4.1.8.3)
The subscriber properties value table is used to provide values for the subscriber properties for a specific
subscriber introduced into the SCE platform.
An entry must be created by setting the entry spvRowStatus object with CreateAndGo (4) before setting
the name of the subscriber and the property requested. The property requested must be one of the
properties from the subscribersPropertiesTable. To remove an entry set the spvRowStatus object with
Destroy (6).
To poll the subscriber property, either of these objects should be polled:
• spvPropertyStringValue
• spvPropertyUnitValue
The table is cleared when the application is unloaded.
Syntax
Sequence of subscribersPropertiesValueEntry
subscriberPropertiesValueEntry (1.3.6.1.4.1.5655.4.1.8.3.1)
Entry providing information on the value of one of the specified subscriber properties.
Index
{pmoduleIndex, spvIndex}
Syntax
SEQUENCE {SpvIndex spvSubName spvPropertyName spvRowStatus spvPropertyStringValue
spvPropertyUintValue spvPropertyCounter64Value }
spvIndex (1.3.6.1.4.1.5655.4.1.8.3.1.1)
An index value that uniquely identifies the entry.
Syntax
INTEGER (1.. 1024)
Access not-accessible
Access not-accessible
Access RO