B-15
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Appendix B Proprietary MIB Reference
pcubeModules (1.3.6.1.4.1.5655.2)
Attack Group: pcubeaAtackGroup (1.3.6.1.4.1.5655.2.3.1.1.15)
The Attack group provides information regarding detected attacks, aggregated by attack type.
Objects:
1. attackTypeIndex (1.3.6.1.4.1.5655.4.1.15.1.1.1), page B-89
2. attackTypeName (1.3.6.1.4.1.5655.4.1.15.1.1.2), page B-89
3. attackTypeCurrentNumAttacks (1.3.6.1.4.1.5655.4.1.15.1.1.3), page B-90
4. attackTypeTotalNumAttacks (1.3.6.1.4.1.5655.4.1.15.1.1.4), page B-90
5. attackTypeTotalNumFlows (1.3.6.1.4.1.5655.4.1.15.1.1.5), page B-90
6. attackTypeTotalNumSeconds (1.3.6.1.4.1.5655.4.1.15.1.1.6), page B-90
VAS Group: pcubeVasTrafficForwardingGroup (1.3.6.1.4.1.5655.2.3.1.1.16)
The VAS group provides information regarding the status of the VAS servers.
Objects:
1. vasServerIndex (1.3.6.1.4.1.5655.4.1.16.1.1.1), page B-91
2. vasServerId (1.3.6.1.4.1.5655.4.1.16.1.1.2), page B-91
3. vasServerAdminStatus (1.3.6.1.4.1.5655.4.1.16.1.1.3), page B-92
4. vasServerOperStatus (1.3.6.1.4.1.5655.4.1.16.1.1.4), page B-92
MPLS/VPN Group: pcubeMplsVpnAutoLearnGroup (1.3.6.1.4.1.5655.2.3.1.1.17)
The MPLS/VPN Group provides data regarding MPLS/VPN auto-learning.
Objects:
1. mplsVpnMaxHWMappings (1.3.6.1.4.1.5655.4.1.17.1.1.1), page B-93
2. mplsVpnCurrentHWMappings (1.3.6.1.4.1.5655.4.1.17.1.1.2), page B-93
Traps Group: pcubeTrapObjectsGroup (1.3.6.1.4.1.5655.2.3.1.1.18)
The traps group includes strings used for notifications.
Objects:
1. pcubeSeEventGenericString1
2. pcubeSeEventGenericString2
3. pullRequestNumber
pcubeCompliances (1.3.6.1.4.1.5655.2.3.1.2)
Module compliance is a compliance statement defined in this MIB module that defines which groups
must be implemented.
pcubeCompliance module-compliances (1.3.6.1.4.1.5655.2.3.1.2.1)
A compliance statement defined in this MIB module, for SCE platform SNMP agents.
Module Name:
pcubeSeMIB
To Next Page
Loading...
